How do I purchase a complete visualizer kits?

If you are ready to DIY, you can start with these two aspects:

Select the ferrofluid display bottle according to your work, and then further improve the size after all the accessories have arrived.
Operate your work according to the accessories, and wait for all the accessories to arrive before designing.

So how do I buy accessories?

Step 1:

Ferrofluid display bottle of Selection: colors, ize, capacity, Click here to choose.

Step 2:

Electromagnet of Selection: Click here to choose.

If you have a electromagnet, you can use your own.

Different volumes of ferrofluid bottles all act differently on the electromagnet.
Effect Reference:
Demonstration videos of application scenarios for several of electromagnets, ferrofluids, and bottles.

Step 3:

selected Visualizer: Click here to choose.

Step 4:

Selecting the power input method:
5V USB TO 12V DC Boost Cable or 5V USB TO Type-C (12V Boost Module)

If you have a 12V power supply you can use it directly.
If your own electromagnets is 5V, the input voltage needs to be based on 5V.
That is to say, when the electromagnets is the load, the voltage is what V, the input voltage must be what V as well.
Our Visualiser supports 5-24V, 2A inputs and outputs.

Step 5:

Other non-essential accessories: such as lights, switches, etc, Click here to choose.

It is usually sufficient to use the visualiser's on-board switches and no additional switches are required.
However, if you need to add additional lighting, then you will need to add an additional switch to control it.

The current version of Visualiser supports timer on / off after the firmware and APP are upgraded to the latest version.

A new version of our video Visualiser has been projected and we believe it will be available soon.

There will no longer be a need for an additional switch to switch off the lights (Switching off the lights means that the Visualiser will also face a power cut, which will disable functions such as timers, which will need to be reset after powering up.）, as the new version of the Visualiser will be able to support the use of both light and audio Visualiser.

Finally：

If you don't understand anything, you can contact us for support.